Microbial transformation of prednisone

The microbial transformation of prednisone (17alpha,21-dihydroxy-pregna-1,4-diene-3,11,20-trione) (1) by Cunninghamella elegans afforded two metabolites, 17alpha,21-dihydroxy-5alpha-pregn-1-ene-3,11,20-trione (2) and 17alpha,20S,21-trihydroxy-5alpha-pregn-1-ene-3,11-dione (3), while the fermentation of 1 with Fusarium lini, Rhizopus stolonifer and Curvularia lunata afforded a metabolite 1,4-pregnadiene-17alpha,20S,21-triol-3,11-dione (4). Compound 3 was found to be a new metabolite. Their structures were elucidated on the basis of spectroscopic techniques. Compound 3 showed inhibitory activity against lipoxygenase enzyme.     

Asymmetric alkylation of diarylmethane derivatives. Improved results using methoxyethoxy substituent

Alkylation of 2-methoxyethoxyphenyl phenyl methane using sec-BuLi and (−)-sparteine has been carried out in excellent yields and up to 94% ee. The best results were obtained in allylation reactions but methylation, ethylation, benzylation and trimethylsilylation have all been carried out with acceptable ee.     

Studies on thermal oxidation of chalcopyrite from Chitradurga,Karnataka State,India

When chalcopyrite is heated in air, up to 350? there is no marked change. Between 350 and 440?, surface material is oxidised to iron sulphate, CuSO₄ and Fe₂O₃, while in regions not accessible to oxygen the formation of Cu₅FeS₄, FeS and S takes place. From 440 to 500? oxidation and sulphation phenomena occur. Stable compounds between 500 and 650? are iron sulphate, CuSO₄ and Fe₄O₃, with a minor amount of 6CuO.Cu₂O indicated at 650?. After the decomposition of iron sulphate, CuSO₄ decomposes, first to CuO.CuSO₄ and then to CuO. By 750? the sulphur has been totally lost from all compounds, while the oxides of copper and iron partly react to form CuFe₂O₄. Final products of oxidation between 800 and 850? are CuO, CuFe₂O₄ and Fe₃O₄.     

Development of novel antioxidants: design,synthesis, and reactivity

We are attempting to develop novel synthetic antioxidants aimed at retarding the effects of free-radical induced cell damage. In this paper we discuss the design strategy and report the synthesis of seven novel antioxidants, including six catechols and a benzylic phenol. The bond dissociation enthalpy (BDE) for the most active (weakest) OH bond in each molecule was calculated by theoretical methods, as well as the BDE for the semiquinone radical. Reaction rates with the nitrogen-centered free radical DPPH(*) were measured in ethyl acetate. The log of k(DPPH) for bimolecular reaction correlated well with the primary BDE. The correlation between rate constants and calculated BDEs shows that the BDE is a good predictor of antioxidant activity with DPPH(*), suggesting that our design criteria are useful and that these compounds should undergo further testing in cell cultures and in animal models.     

Sensitive and selective ion exchange test for microgram detection and spectrophotometric determination of picric acid

The microgram detection and determination of picric acid with sodium hypochlorite solution is based on its oxidation in alkaline solution and chlorination with excess of chlorine present in hypochlorite solution. A characteristic orange color is obtained, which can be used as a specific test. The sensitivity of the picric acid was enhanced by performing the resin spot test. This color reaction was applied for the determination of picric acid spectrophotometrically.     

N-Methylethylxanthocarbamate as an Analytical Reagent: Differential Pulse Polarographic Determination of Cadmium in Standard Alloys, Biological and Environmental Samples after Adsorption of its Complex on Microcrystalline Naphthalene

N-methylethylxanthocarbamate has been used as an analytical reagent for the determination of trace amounts of cadmium in standard alloys, biological, and environmental samples. The reagent has been found to form a water insoluble complex with cadmium. It is quantitatively adsorbed over microcrystalline naphthalene in the pH range 2.5 to 12.0. The metal complex is desorbed with HCl and cadmium determined with a differential pulse polarograph. The detection limit is 0.05 ppm (signal-to-noise ratio = 2) and the linearity is maintained in the concentration range 0.2–25 g/ml, with correlation coefficient of 0.9995 and a relative standard deviation of ±0.81%. Characterization of the electroactive process includes an examination of the degree of reversibility. Various parameters, such as the effect of pH, reagent concentration, amount of naphthalene, volume of aqueous phase, and the interference of a large number of metal ions on the determination of cadmium, have been studied in detail to optimize the conditions for its determination in various complex materials.     

Spectrophotometric studies on the complexation equilibria of Ni and Pb with 2-carboxy-2-hydroxy-5'-sulfo-formazylbenzene. Simultaneous determination of trace amounts of Ni and Pb

Spectrophotometric studies have been made to investigate the reaction of Nickel and Lead with 2-carboxy-2'-hydroxy-5'-sulfoformazyl-benzene (zincon) in 50%(v/v) ethanol-water at 25 degrees C and an ionic strength of 0.1 M NaClO4. A complete picture of the complexation equilibria in the pH range (4.2-12.0) for nickel and (1.9-11.5) for lead are presented. Simple, rapid, selective and sensitive methods for the spectro-photometric determination of nickel and lead has been developed based on the color reaction of their complexes with zincon. The methods allow the determination of 4.69 microg mL(-1) of nickel at pH = 6.3 (lambdamax = 665 nm) and 10.3 microg ml(-1) of lead at pH = 5.6 (lambdamax = 610 nm). The apparent molar absorptivities were epsilon = 1.3 x 10(4) L mol(-1) cm(-1) for nickel and epsilon = 0.6 x 10(4) L mol(-1) cm(-1) for lead. The interference of a large number of foreign ions and complexing agents has been studied. Thiosulphate, as masking agent allows the simultaneous determination of nickel and lead in the presence of high concentrations of copper. Ascorbic acid, sodium cyanide and or sodium fluoride provide the elimination of many other interferences. The methods have been applied successfully to the simultaneous determination of nickel and lead in an aluminium and non-ferrous alloy.     

Determination of Br,Rb, Cs,Sc and Na in various plant leaves located in an urban park by neutron activation analysis

In order to determine the effect of airborne emission of trace elements, e.g. Br, Rb Cs, Sc and Na on roadside ecosystem, concentrations were determined in different species of plants from an urban park at Lahore. For monitoring purpose attention was paid to the leaves ofSapindus mukorossis, Alstonia scholaris andDiospyros embryopteris. Different varieties of tissues were found to have different concentration of trace elements when compared among themselves. The concentration of trace element deposition was compared with the values reported in literature. Significant pollution was observed.     

One-Pot Convenient and High Yielding Synthesis of Dithiocarbamates

Summary. A convenient and high yielding method for the synthesis of diverse dithiocarbamates having various substituents including alkyl, aryl, heteroaryl, and alkylaryl at the thiol chain or at the amine chain or at both thiol and amine chains were developed by the one-pot reaction of mercaptans, amines, and bis(benzotriazolyl)methanethione in presence of amidine base under mild reaction conditions.     

Reactions of [(Cp)2Ti(NCS)2] as a potential metalloligand; synthesis and physico-chemical investigations of novel heterobimetallic complexes

Summary Bis(cyclopentadienyl)titanium(IV) diisothiocyanate [(Cp)₂-Ti(NCS)₂] reacts with MCl₂ (M = Cu, Pd or Pt), [CuCl(PPh₃)₃], [RuCl₂(PPh₃)₃] and [RuCl₂(DMSO)₄] (DMSO = dimethylsulphoxide) giving solid compounds of stochiometry [(Cp)₂Ti(-NCS)₂MCl₂] (M = Cu, Pd or Pt), [(Cp)₂Ti(-NCS)₂CuCl(PPh₃)], [(Cp)₂Ti(-NCS)₂-RuCl(PPh₃)₂]Cl and [(Cp)₂Ti(-NCS)₂RuCl₂(DMSO)2]. These products have been characterized by physicochemical and spectroscopic methods.